Wednesday, January 26, 2011

Colonial Commercial Corp. Subsidiary Appointed Distributor of GeoStar Geothermal Heat Pumps

From Business Wire: Colonial Commercial Corp. (“Colonial”) (OTC Bulletin Board: “CCOM,” “CCOMP”) today announced that its Universal Supply Group, Inc. (“Universal”) subsidiary has been appointed as a GeoStar distributor for New Jersey and portions of New York, Massachusetts and Connecticut. GeoStar is a division of WaterFurnace Renewable Energy, a manufacturer of residential, commercial, industrial and institutional geothermal and water source heat pumps.

Geothermal units are similar to ordinary heat pumps, but use energy stored just below ground-level to provide heating, air conditioning and hot water. In the winter, heat is brought in through a loop, concentrated, and then delivered throughout the home to utilize that stored energy. During summer, excess heat in the home is removed and put back into the earth. Because geothermal units use the earth’s natural heat, they are among the most efficient and comfortable heating and cooling technologies currently available.

To read the full release please click on the link below:
Colonial Commercial Corp. Subsidiary Appointed Distributor of GeoStar Geothermal Heat Pumps


Yours,
Berlin Technologies

FPI Pumps, Inc. Provides All Stainless Steel Axial Flow Propeller Pumps in Four Weeks

From ThomasNet: When the flood control pumps in the City of Fort Lauderdale's S-2 storm water pumping station needed to be replaced, city maintenance supervisor Greg Duty knew that FPI Pumps, Inc., an Axial Flow Propeller Pump manufacturer based in Pompano Beach, was the company he could count on.

Three of the City's flood control pumps, built by a competitor, needed to be replaced. Mr. Duty was already familiar with the quality of FPI's pumps, through previous units the company had supplied to the city. However, Mr. Duty now had a need for pumps that could be built quickly for a critical flood control zone in the popular, trendy New River area of the city. Additionally, the specification called for Stainless Steel construction throughout, due to the brackish (fresh water/sea water) mix the pump would see.


To read the full release please click on the link below:
FPI Pumps, Inc. Provides All Stainless Steel Axial Flow Propeller Pumps in Four Weeks

Yours,
Berlin Technologies

Monday, January 17, 2011

Economy Turns the Corner - State of Industry 2011

From Pumps & Systems: For the past two years, Pumps & Systems has used this annual “State of the Industry” space to report market uncertainty within the process industries that we cover. The economic impact of a new U.S. administration combined with stimulus package updates and a struggling overall economy has plagued these pages—making it difficult to find industry optimism. This year, however, there is a different tone.

Reports from the field indicate a rebound in the pump, seals, drives and motors markets for a positive 2011 outlook. Large corporations and small companies are experiencing significant signs of increased business. Following a couple years of disciplined inventory maintenance, competitive bidding, strategic acquisitions and other conservative trends, companies prepare for a long-awaited upturn.

To read the full article please click on the link below:
Economy Turns the Corner - State of Industry 2011

Yours,
Berlin Technologies

Wednesday, January 12, 2011

Berlin Technologies is participating in Israchem 2011

Berlin Technologies will participate in Israchem 2011, the 12th International Exhibition for Chemical and Process Industries, which will take place on February 22-24, 2011 in Tel-Aviv Fairgrounds.

Here are more details on Israchem:

Israchem:
The exhibition for technologies, equipment, and services for the following industries:
Process, chemical, petrochemical, plastics, oil refining, pharmaceuticals, biotechnology, food, Detergents, cosmetics, ecology, minerals, fertilizers, weed and pest control, paints & adhesives.

Exhibition Dates & Opening Hours:

February 22nd-24th, 2011.
Opening Hours: Tuesday - Thursday, 09:00-17:30.

Location: Israeli Trade Fairs & Convention Center, Tel Aviv, Hall No. 1.

Guests and Visitors:
Managers, buyers, chemical engineers & practical engineers, mechanical engineers, environmental engineers, Maintenance engineers & managers, electrical and electronics engineers, R&D, scientists, technologists, chemists, technicians, tool-operators, quality assurance mangers, laboratory managers, lab technicians, plant managers, agronomists as well as logistics & purchasing managers.

Concurrent Events:
Israchem 2011 will be held in conjunction with:
Anliza 2011 - International Exhibition for Laboratory Technologies & Equipment, Biotechnology, Instrumental & Chemical Analysis.
Maintenance 2011 - The Exhibition for Industrial & Facility Maintenance.
SafeWork 2011 - The Exhibition for Occupational Safety & Industrial Hygiene.

Congresses & Meetings:
Conventions and meetings will be held concurrently with the exhibition. For further information please contact Stier Group’s conventions department: conventions@stier-group.com. Please refer to our website for updates on all congresses (www.stier-group.com).

We hope to see you there!

Yours,
Berlin Technologies

Tuesday, January 11, 2011

KNOLL America Receives 3-A Sanitary Standards Certification For Submerged Sanitary Pump

From Beverage Online: KNOLL America, the US subsidiary of the German company, KNOLL Maschinenbau GmbH, announces that it has received 3-A certification for its new MX Series of Sanitary Pumps.

3-A Sanitary Standards, Inc. (3-A SSI) is an independent, not-for-profit corporation dedicated to advancing hygienic equipment design for the food, beverage, and pharmaceutical industries. 3-A SSI represents the interests of three stakeholder groups with a common commitment to promoting food safety and the public health—regulatory sanitarians, equipment fabricators and processors.

To read the full release please click on the link below:
KNOLL America Receives 3-A Sanitary Standards Certification For Submerged Sanitary Pump

Yours,
Berlin Technologies

New from Allweiler: Alldur Stators



Yours,
Berlin Technologies

Monday, January 3, 2011

Centrifugal Pumps are available in 17 in. size variants

From ThomasNet: Griswold(TM) Pump Company, a leading manufacturer of centrifugal pumps, is proud to announce the availability of three new 17 inch 811 Series pump models. These new models complete the ANSI B73.1 product line and are 100% compatible / interchangeable with many competitive B73.1 pump models.

Griswold offers all 811 Series pumps in bare-shaft or base mounted configurations. Griswold also offers ATEX compliant bare-shaft models (classified II 2 GD c IIC TX) that feature the CE mark for importation into the European Union.


To read the full release please click on the link below:

Introduction of the 17 Inch 811 Series Griswold(TM) Pumps

Yours,
Berlin Technologies